|
|
|
|
|
 |
|
| |
| Other Products >> Consumables Inserts |
| We manufacture consumable inserts in number of shapes, styles and classes. The insert material too depends on application, The details are given in the following table. |
| Materials |
Class (Shape) |
Recommended Applications |
| Group A : C-Mn steel ER70S - 2 (IN MS 1) |
1(Inverted "I" and "A") |
For joints with specific, matching tolerances of pipes ID levels and land. Useful for Nuclear piping / Critical applications. |
| Group C : Stainless Steel 308L, 310, 312, 316L, 347 |
3 & 5 (U) |
|
| Group E : Nickel and Nickel Alloys |
4 (V) |
For joint with less rigid fit up requirements. Useful for small and large diameter pipes.
For Pipes beveled to 37.5° angle and no land Y type inserts permits economic joint preparations and greater fit up tolerance. Useful for Nuclear piping and other field fit up. |
| Style A Coiled Insert 16 m. - long wound on 300 mm dia rim. Style B Prefabricated rings. Open Lap Joint. Style C Prefabricated rings Open Butt Joint. |
|
| |
|
| |
Top  |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| Other Products >> Flux for Single Side Welding |
| In thin sheet welding where burn through and under bead geometry and cleaning are critical problems use of Solar Flux is the solution. Solar Flux is a unique chemical which can help you to solve many of your one sided welding problems. This flux can be easily applied and has proven record of over 40 years in the Welding Industry in USA |
| The advantages of using this flux are |
- Prevents Oxide inclusions
- Protects the back side from Oxidation
- Provides support! for molten weld metal
- Prevents burn trough
- Eliminates Porosity and
- Controls Penetration
|
| Brand (Specification) |
Recommended Applications |
Type B
(Mil-F-7516B
Class 2 & 4) |
Recommended for Application for Stainless Steel using Same Procedure that would be used with Argon Backing Gas, The Flux is Suitable for Application for Welding by any Gas or Arc Method |
Type I
(Mil-F-7516B
All Classes)
|
Recommended For Application for High Nickel Alloys (Over 25%) Using Same Procedure that would be used with Argon Backing Gas, The Flux is suitable for Application for Welding by any Gas or Arc |
|
|
| |
|
| |
Top |
| |
|
| |
|
| |
|
| |
|
| |
| Other Products >> Soluble Dam Paper |
| Soluble Dam Paper is the best material to create a purge chamber of TIG root run in welding or pipes. These papers are water and steam soluble and leave no unwanted residue. It can withstand a temperature up to 150°C without loosing its property. The details of various grades stocked / available are as follows : |
| Grade |
Available (Sizes) |
Recommended Applications |
WLD-35
(0.035" THICK) |
8.5" X 11" Sheet
17" X 22" Sheet
9 X 165 Roll
15.5 X 165 Roll |
For Purge Dam in Pipes From 4" To 20" Diameter |
| WAT-N-TAPE |
1" X 300 ROLL
2" X 300" ROLL |
It Is Pressure Sensitive Water Soluble Tape recommended to fix Purge Dams in positions and when needed to splice two or more pieces of paper. This tape is compatible with all above papers. |
|
|
| |
|
| |
Top |
| |
|
|
|
|
